STAHLS EFFECT HOLOGRAPHIC

• Set iron dial between Cotton and Linen
• Cover design with Baking Paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold

Application Instructions (heat press)

• Preheat garment for 2-3 seconds
• Apply design at 300 / 150C
• Use medium pressure for 10 seconds
• Peel carrier cool

Wait at least 24 hours before washing

 *Colours are a guide only

Sheets and Metres may be + / - .25 inches